For wood

Discover our range of details for furniture and wooden products! Here you'll find practical furniture glides with nail, ring, or screw, feet for staples, as well as corner protectors, spacers, and washers. Smart and practical solutions for function and design.

For wood

Filter

Foot holder PIN-CH® for wood

PIN-W

Foot holder for our flexible PIN-CH® system for wooden legs, where you choose the foot part depending on floor surface and furniture design. The foot holder is mounted straight into the leg and the foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for chairs and other types of furniture. Used together with PIN-CHP, PIN-CHPF, PIN-CHA, PIN-CHAF, PIN-CHF and PIN-CHFF. The PIN-CH® system is based on being able to easily replace the foot part when it is worn out or when moving a piece of furniture to a different surface. The foot parts are marked to make it easier to find new parts.

Foot part PIN-CH® Flexible

PIN-CHF

Flexible foot part for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for chairs, among other things, with angles between 0 and 15 degrees. Available in several sizes. Used together with foot holders PIN-T (tube) and PIN-W (wood). The PIN-CH® system is based on the ability to easily replacing the foot part when it is worn out or when moving furniture to another floor surface. The components are marked to make it easier to find new parts.

Foot part PIN-CH® Flexible with felt

PIN-CHFF

Flexible foot part with felt for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for chairs, among other things, with angles between 0 and 15 degrees. Available in several sizes. Used together with foot holders PIN-T (tube) and PIN-W (wood). The PIN-CH® system is based on the ability to easily replacing the foot part when it is worn out or when moving furniture to another floor surface. The components are marked to make it easier to find new parts.

Foot part PIN-CH® Plane

PIN-CHP

Plane foot part for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for chairs, among other things, and is available in several sizes. Used together with foot holders PIN-T (tube) and PIN-W (wood). The PIN-CH® system is based on the ability to easily replacing the foot part when it is worn out or when moving furniture to another floor surface. The components are marked to make it easier to find new parts.

Foot part PIN-CH® Plane with felt

PIN-CHPF

Plane foot part with felt for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for chairs, among other things, and is available in several sizes. Used together with foot holders PIN-T (tube) and PIN-W (wood). The PIN-CH® system is based on the ability to easily replacing the foot part when it is worn out or when moving furniture to another floor surface. The components are marked to make it easier to find new parts.

Foot part PIN-CH® Angled

PIN-CHA

Angled foot part for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. The glide has a rotation stop ensuring that the foot part stays in place. Suitable for chairs, among other things, and is available in several angles and sizes. Used together with foot holders PIN-T (tube) and PIN-W (wood). The PIN-CH® system is based on the ability to easily replacing the foot part when it is worn out or when moving furniture to another floor surface. The components are marked to make it easier to find new parts.

Foot part PIN-CH® Angled with felt

PIN-CHAF

Angled foot part with felt for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. The glide has a rotation stop ensuring that the foot part stays in place. Suitable for chairs, among other things, and is available in several angles and sizes. Used together with foot holders PIN-T (tube) and PIN-W (wood). The PIN-CH® system is based on the ability to easily replacing the foot part when it is worn out or when moving furniture to another floor surface. The components are marked to make it easier to find new parts.

Glide plug

IC-008

Suitable for wooden furniture legs. Provides a less visible foot than for example a nail glide. Thick glide surface with high friction Note: The glide plug should end up in the bottom of the drilled hole. This mean that the hole depth determines how much the glide protrudes.

Glide plug

IC-006

Suitable for wooden furniture legs. Provides a less visible foot than for example a nail glide. Thick glide surface with low friction. Note: The glide plug should end up in the bottom of the drilled hole. This mean that the hole depth determines how much the glide protrudes.

Glide plug

IC-007

Suitable for wooden furniture legs. Provides a less visible foot than for example a nail glide. With thick, felted glide surface. Note: 1. The glide plug should end up in the bottom of the drilled hole. This mean that the hole depth determines how much the glide protrudes. 2. Less suitable for concrete and tiled floor.

Expiring

Glide plug

IC-011

Glide in mineralbased plastics. The material is both biodegradable and compostable. Suitable for wooden furniture legs. Provides a less visible foot than for example a nail glide. The glide has a surface with low friction. Note: The glide plug should end up in the bottom of the drilled hole. This mean that the hole depth determines how much the glide protrudes.

Expiring

Glide plug

IC-012

Glide in bioplastics. The material is both biodegradable and compostable. Suitable for wooden furniture legs. Provides a less visible foot than for example a nail glide. The glide has a surface with low friction. Note: 1. The glide plug should end up in the bottom of the drilled hole. This mean that the hole depth determines how much the glide protrudes. 2. Less suitable for concrete and tiled floor.

Glide plug

IC-015

Suitable for wooden furniture legs. Provides a less visible foot than for example a nail glide. Surface with high friction.

Glide plug

IC-013

Suitable for wooden furniture legs. Provides a less visible foot than for example a nail glide.Surface with low friction.

Expiring

Glide plug

IC-014

Glide

SP-GKF1

With sound absorbing felt. Embedded nail. Note: Less suitable for concrete and tiled floor.

Glide

SP-GKI

Glide

SP-GK3

Glide

SP-GKL

Glide

SP-GKMLM

Glide

SP-GKMLK

Glide

SP-GKI2

Glide with low friction. It reduces the sound somewhat, thanks to a soft material layer and low friction. Rounded corners and edges are great on carpets. With nail.

Glide

SP-GKI3

Glide with low friction. It reduces the sound somewhat, thanks to a soft material layer and low friction. Rounded corners and edges are great on carpets. With nail.

Glide

SP-GK4

Glide

SP-GKF2

With embedded sound absorbing felt. Two embedded nails. Note: Less suitable for concrete and tiled floor.

Glide

SP-MG

Nickel plated steel. Without centre nail.

Glide

SP-MGS

Glide

SP-GKR1

Glide

SP-GKR4

Glide

SP-GKR3

Glide

SP-GKR5

Glide. Cautious fastening. High friction. Recommended only in end grain. Not recommended for oak. Note: 1) One ring.

Glide

SP-GKR2

Glide

SP-GKMF

Glide

SP-GKAS

Glide

SP-GKFS

Glide

SP-GKH

Glide with screw-hole.The glide reduces the sound somewhat, thanks to a soft material layer and low friction. Rounded corners and edges are great on carpets. Note: To control how good the foot is attached and that the friction feels right, we recommend that you always test before production. Screws included.