For round surface

A wide selection of furniture feet for round surfaces, adapted to various furniture types and surfaces. From feet with protective felt to different friction options. Depending on the product, fastening is made with pins, screws or clips.

For flat and rounded surface

Filter

Foot holder PIN-CH® Horizontal

PIN-CS

Horizontal foot holder for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot holder is mounted into the tube and fastened with screws. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for school chairs, among other things, and is available for several tube dimensions. Used together with PIN-CHSCRCS and PIN-CHSCRCSF. The PIN-CH® system is based on being able to easily replace the foot part when it is worn out or when moving a piece of furniture to a different surface. The components are marked to make it easier to find new parts.

Foot holder PIN-CH® Curved tube

PIN-SCR

Horizontal foot holder for our flexible PIN-CH® system for curved tubes, where you choose the foot part depending on floor surface and furniture design. The foot holder is mounted onto the tube and fastened with screws. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for school chairs, among other things, and is available for several tube dimensions. Used together with PIN-CHSCRCS and PIN-CHSCRCSF. The PIN-CH® system is based on being able to easily replace the foot part when it is worn out or when moving a piece of furniture to a different surface. The components are marked to make it easier to find new parts.

Foot part PIN-CH® Rectangular

PIN-CHSCRCS

Rectangular foot part for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for school chairs and other furniture with horizontal tubes. Used together with foot holders PIN-SCR and PIN-CS. The PIN-CH® system is based on the ability to easily replacing the foot part when it is worn out or when moving furniture to another floor surface. The components are marked to make it easier to find new parts.

Foot part PIN-CH® Rectangular with felt

PIN-CHSCRCSF

Rectangular foot part with felt for our flexible PIN-CH® system where you choose the foot part depending on floor surface and furniture design. The foot part is mounted in the foot holder with a click and removed with, for example, a screwdriver. Suitable for school chairs and other furniture with horizontal tubes. Used together with foot holders PIN-SCR and PIN-CS. The PIN-CH® system is based on the ability to easily replacing the foot part when it is worn out or when moving furniture to another floor surface. The components are marked to make it easier to find new parts.

Glide

SC-005

Suitable for chairs.

Glide

SC-007

With felt. Suitable for chairs. Note: Less suitable for concrete and tiled floor.

Glide

SC-GK3

With high friction. Two screw holes.

Glide

SC-GK1

Suitable for chairs.

Glide

SC-GKF

Suitable for chairs. Note: Less suitable for concrete and tiled floor.

Glide

SC-GKT

Suitable on quite stationery products. With peg. Note: Less suitable for holes where sharp edges and shape variations may occur.

Glide

SC-GK2

Suitable for chairs. Two screw holes.

Glide

SC-GK6

Suitable for chairs.

Glide

SC-STARP

Suitable for chairs. With clamp-on function and peg that block rotation. Note: Less suitable for holes where sharp edges and shape variations may occur.

Glide

SC-STARPF

With felt. Suitable for chairs. With clamp-on function and peg that block rotation. Note: Less suitable for concrete and tiled floor. Less suitable for holes where sharp edges and shape variations may occur.

Glide

SC-STARP1

Suitable for chairs. With clamp-on function and peg that block rotation. Note: Less suitable for holes where sharp edges and shape variations may occur.

Glide

SC-STARP2

Suitable for chairs. With clamp-on function.

Glide

SC-GK4

For bended furniture leg. One or two screw holes.

Glide

SC-GKK005

With felt. For bended furniture leg. Two screw holes. Note: Less suitable for concrete and tiled floor.

Glide

SC-006

For bended furniture leg.

Glide

SC-008

With felt. For bended furniture leg. Note: Less suitable for concrete and tiled floor.

Glide

SC-GK5

Suitable for chairs. With clamp-on function and peg that block rotation. Note: You have to grind the sharp edges.

Glide

SC-GKF2

With welded felt. Suitable for chairs. With clamp-on function and peg that block rotation. Note: Less suitable for concrete and tiled floor. Less suitable for holes where sharp edges and shape variations may occur.

Glide

SC-GKB

For horizontally bended furniture leg.

Glide

SC-GKBF

For horizontally bended furniture leg. With felt.

Glide

SC-004

High friction

Glide

SC-002

Note: Less suitable for concrete and tiled floor. Less suitable for holes where sharp edges and shape variations may occur.

Glide

SC-003

Note: Less suitable for holes where sharp edges and shape variations may occur.

Glide

SC-001

Note: Less suitable for holes where sharp edges and shape variations may occur.

Glide

SC-STAR

Suitable for quite stationery products. With peg. Note: Less suitable for holes where sharp edges and shape variations may occur.

Glide

SC-GKT3

For bended leg on qutie stationery products. Note: Less suitable for holes where sharp edges and shape variations may occur.

Glide

SC-GS

Suitable for chairs. With clamp-on function and peg that block rotation. Note: Less suitable for holes where sharp edges and shape variations may occur.

Spacer

SCSC-DKD

Saddle washer/spacers, primarily for use in simple screw joints on parallel tubes.

For round surface

Filter

Color

Characteristics